B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
(3565 reviews)
Price: $599.00
In Stock
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Item # BWGNRK1308
Our Price: $599.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3565)
- Q & A (0)
- Photos
B and W Gooseneck Hitch - BWGNRK1308
- B and W
- Removable Ball - Stores in Hitch
- Below the Bed
- Wheel Well Release
- Manual Ball Removal
- 30000 lbs GTW
- 2-5/16 Hitch Ball
- 7500 lbs TW
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- Access handle at rear driver's-side wheel well
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs
- Tow a 5th-wheel trailer with the B&W Companion hitch adapter
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 4" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
GNRK1308 B and W Turn Over Ball Gooseneck Trailer Hitch - 30,000 lbs
GNRM1308 B and W Turn Over Ball Gooseneck Hitch Custom Installation Kit
GNRC907 B and W Turn Over Ball Under Bed Gooseneck Hitch Center Section
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2013 Ram 2500 6-1/2 Foot Bed
- 2010 - 2013 Ram 2500 8 Foot Bed
- 2010 - 2012 Ram 3500 6-1/2 Foot Bed
- 2010 - 2012 Ram 3500 8 Foot Bed
- 2006 - 2008 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed - Mega Cab
- 2010 - 2013 Dodge Ram Pickup 2500 - 6-1/2 Foot Bed
- 2006 - 2009 Dodge Ram Pickup 2500 - 6-1/2 Foot Bed - Mega Cab
- 2010 - 2013 Dodge Ram Pickup 2500 - 8 Foot Bed
- 2010 - 2012 Dodge Ram Pickup 3500 - 6-1/2 Foot Bed
- 2006 - 2009 Dodge Ram Pickup 3500 - 6-1/2 Foot Bed - Mega Cab
- 2010 - 2012 Dodge Ram Pickup 3500 - 8 Foot Bed
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1308
Average Customer Rating: 4.8 out of 5 stars (3564 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: DBel10/11/2023
B&W are great products……. Their product packaging is terrible the hitch comes in two boxes and one box was tore completely open and half of the hardware was missing now I’m sitting here waiting on Etrailer to fix my problem
by: James Q.08/09/2019
Have been driving cross country since purchase. I'm am also using the companion 5th wheel slide with my application. With numerous slides and coupling and uncoupling. Both have performed flaulusly. Cudos to BW.
by: Dustin 04/18/2024
2008 Dodge Ram Pickup
I had my order before I was even ready to install it. Excellent work!
by: Dan 03/22/2024
2007 Dodge Ram Pickup
fast service and good customer service
by: John A04/04/2018
2013 Ram 2500
Called customer service, actually spoke with a real person, Karen, and she verified the B&W hitch kit I needed. She gave email updates on my order. It arrived fast and in good condition. Installed B&W gooseneck hitch, holes did not line up as B&W states. I had to drill holes in the frame myself to continue installation. All else went well. Etrailer/Karen 5 stars and B/W 4 stars.
by: Mike02/20/2019
B&W is the best in the business.. this is my second B&W turnover and both were easy to install (took about an hour and half) and fit perfectly. Do yourself a favor and spray the ball socket with Fluid-Film or similar. Does two things... inhibits rust and also prevents ball from freezing in socket during snowy winter months.
Mike
2/21/2020
1 year update.. hitch has worked great with zero issues. My only complaint is no matter how hard you try, the frame plates on all B&W hitches seem to rust very quickly. Even with regular Fluid-Film treatment and very little winter driving or salt exposure, the paint flakes off and rust grows quickly. Overall... still a great product!
by: James S04/09/2021
Very impressed with my order. Etrailer tracking nad delvery is the best I have ever seen. I followed my order from the time I placed it until final delivery on their web site, awesome. Will give fowwow up after installation
Jim S.
4/10/2022
The recessed ball is wonderful. Strong and out of the way when not needed. To my surprize, everything went easy, following the instructions.
by: Anthony 09/27/2023
Fast service
by: 5249gjc04/19/2018
2006 Dodge Ram Pickup
B&W and Etrailer are a great combo. I just ordered this hitch after having a similar one in my 06 Ram. I really like the hitch. I also like that the companion fifth wheel and other B&W accessories can be used on both trucks. I just installed last night and by myself it took about 5 hours. Watch the video and read the instructions. Take your time and do the prep work to get ready for install. I didn’t remove the rear muffler portion and still had plenty of room. I did have a ceiling lift that helps center and lift the hitch portion through the hole. If you don’t have that make sure you have help. Fit as expected with minimal issue. I did not trim the wheel well plastic but may so the handle isn’t hidden. I installed hitch then replaced plastic bedliner and drilled hole through hitch opening from underneath. I also drilled the u-bolt holes with bedliner in and they fit perfectly between the rises.
by: m jones03/27/2016
Ford F-250 Super Duty
Received turnover gooseneck hitch and tow & stow receiver hitch very timely. Installed turnover ball without any problems. The adjustable tow & stow works well on the various height trailers and farm implements that I use. This is the second turnover gooseneck I have purchased. One on Ford F-250 the other on Dodge 2500, instructions are great and parts are accurate. Well satisfied with B&W Products and your service at etrailer. Thanks
by: Darren01/20/2019
Dodge Ram Pickup
Was a fairly easy install in both a Ram Mega Cab 3500 and a Ford F-350. Cutting the hole in the bed was the most intimidating part, but as long as you measure just as the directions tell you, it turns out seamless. This is the only way to go if you need a gooseneck hitch!
by: Brian B09/10/2019
Purchased for my 2006 Ram MegaCab. I already owned a Companion sliding 5th wheel plate, so I only needed the plate to make it work on this truck. Great product, install was simple and required very little modification to the truck, only the bed floor needs to be cut.
by: Charles 09/22/2021
2012 Dodge Ram Pickup
Received the hitch kit for a 2012 Ram 2500 Mega Cab in about 4 working days. The product is very well built and heavier duty than I thought. After receiving it I installed it this morning with just some basic tools and instructions. I did watch a few videos online but I followed the instructions that came with it step by step and didn't have any issues. All in all, from taking wheel liners out to finished it took about 2 1/2 hrs. I am really impressed with the end product. No major modifications were required and no major tools were needed. My truck is however lifted so getting under it and not removing the tires was a advantage. I would defiantly recommend this kit to anyone looking for a high-rated kit. Next up is to order the Companion 5th wheel to go with it. Thanks for making things so easy to find etrailer!
by: James04/05/2022
Great product, easy instructions but had to get an open end socket to torque the last bolt behind the spring latch the swivel socket wouldn’t cut it. Left the exhaust so I had a place to rest the head of the gooseneck. Ratchet strap with a round bar on two jack stands in the bed work great for holding it into place while you install the bolts by yourself.
by: Aric 05/20/2020
Ram 2500
I purchased and installed the hitch myself for my Dodge 2500 Mega cab. Carefully measured and marked the hole locations in my bed, just as the directions indicated. Just like that and a short time later I was finished. I like the turnover design and easy-to-follow instructions.
by: Matt04/30/2015
2008 Dodge Ram Pickup
I have had three gooseneck hitches in different trucks and by far this is my favorite. Instructions are good but watch the video it really helps you understand how it goes together when you are reading through the instruction and installing. Thanks etrailer for the video!
by: Billy07/11/2018
2012 Dodge Ram Pickup
Excellent Product, all parts arrived on time, install went very easy with two people. Only thing I would recommend anyone buying this hitch for a Dodge Ram Mega Cab would be to go ahead and order either the 4-inch extender ball or the Extend-A-Goose Coupler. I order my new Coupler today from etrailer should be here Friday.
by: Mike L09/25/2016
2006 Dodge Ram Pickup
The hitch was better than I thought it would be. Installation was easy with the enclosed instruction sheets. The Quality of the hitch assy. is great. I highly recommend this hitch.
The wiring harness worked great and was easy to install.
by: Joseph 11/15/2021
So far so good. In a year, I’ve used it exactly one time to move a large fifth wheel trailer 100’. I thought I would use it more, but I have not.
by: Brenden02/07/2021
You cannot find a better hitch with a better thought out way to install it, especially when you use the etrailer online install video.
by: Jim08/18/2015
2012 Dodge Ram Pickup
Install was easy. Set aside a few hours for the install. Only one issue. Directions state crossmember must sit flush with the forward brace of the bed mounts. Found during the final tightening of the bolts, it is impossible to maintain the crossmember against the brace. This caused delay trying to maintain "no gap". The bolt holes in the frame make this "no gap" impossible.
by: Josh 08/29/2022
This kit was easy to install and great quality. Very pleased with the hitch.
by: Andrea05/22/2016
Great hitch. I put one of these in every truck I get and recommend friends to use this hitch also.
by: Gary B11/19/2016
2012 Dodge Ram Pickup
This was one of the best purchases in a while. Reasonable to put together and rugged.
by: Carol 10/01/2020
Always try to order from etrailer. Have always been satisfied
25
3544
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- Availability of Just Rail Kit of B and W Turnoverball # BWGNRK1308For just the rail kit of the B and W Turnoverball hitch # BWGNRK1308 you'd just want the part # BWGNRM1308.
view full answer... - Which B and W Turnoverball Gooseneck Hitch Fits 2010 Dodge Ram 3500 Long BedB and W does have a turnoverball gooseneck hitch that fits your 2010 Dodge Ram 3500 long bed with the part # BWGNRK1308 but the part number you mentioned does not fit. The # BWGNRK1308 does come with everything needed to install on your truck. I attached an install video for this on a similar Ram as yours as well.
view full answer... - Correct B&W Turnoverball Gooseneck Trailer Hitch for a 2007 Dodge Ram 3500 Mega CabThe correct Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches/B&W Turnoverball Gooseneck Trailer Hitch for a 2007 Dodge Ram 3500 Mega Cab is part # BWGNRK1308.
view full answer... - Is Exhaust System Permanently Lowered to Install Blue Ox Gooseneck on 2013 Dodge Ram MegaCabI spoke with my contact at Blue Ox about your 2013 Dodge Ram Mega Cab and the exhaust. They do furnish replacement hangers for the exhaust with the DH1102 Hitch. My contact told me that the hangers are adjustable and depending on the installation, the exhaust could be as much as 3 inches lower. I have attached a photo that shows the hangers in the kit and the dimensions when they are retracted and fully extended. I have also included a video that shows this hitch being installed. If clearance...
view full answer... - Identifying PullRite Traditional Series Puck System in Bed of 2008 Dodge Ram 3500After a couple of phone calls, I found out that the puck spacing in your truck is for an obsolete L800 PullRite Super Fifth Wheel Hitch. We don't offer anything compatible with that puck system, but you could remove the existing under bed rail assembly and install a US made B &W Turnover Gooseneck hitch, part # BWGNRK1308. You can see an install video by clicking the provided link. The # BWGNRK1313 Turnover Ball hitch isn't compatible with Mega Cab models.
view full answer... - Which B&W Turnoverball Gooseneck Hitch Fits A 2012 Ram 3500 DRW With 6-1/2' Bed?I have another option for you but the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1314 you were looking at is only confirmed to fit the 2013-2018 Ram 3500 and will not fit your 2012 Ram 3500. Instead you will need the # BWGNRK1308 if your Ram has a gasoline engine or # BWGNRK1313 if it has the diesel engine. The B&W Turnoverball is the best gooseneck hitch currently on the market due to allowing you to store the ball upside down in...
view full answer... - Which B and W Turnoverball Gooseneck Fits 2007 Dodge RamThe difference between the two B and W Turnoverball gooseneck hitches and which would be better for your 2007 Dodge Ram is going to be based on what cab style your truck has. If it's a mega cab you'd want the part # BWGNRK1308 and if it's not a mega cab part # BWGNRK1313. The mega cab looks like it has about a foot of additional cab behind the rear door. Non mega cab 4 doors the distance is about half that.
view full answer... - Difference Between The B&W Turnoverball Hitch # BWGNRK1308 And # BWGNRK1313The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1308 is for select Ram models/years with a gas engine while the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1313 is designed for select Ram models/years with a diesel engine
view full answer... - Recommended Underbed Gooseneck Hitch for a 2013 Ram 2500 DieselSince your 2013 Ram 2500 has a diesel engine you will want the B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1313. This kit is made specifically for the Ram 2500's with diesel engines and fits both the 6-1/2' bed and 8' beds. It has a 30,000 lbs capacity The hitch ball of the B&W gooseneck hitch has a square shank that fits directly in the base and is secured with a steel locking pin. This square base, along with the powder-coated steel construction of the hitch, is why...
view full answer...
- Will B&W Gooseneck Hitch Work On A 2006 Dodge Ram 3500 Mega With Air Shocks Yes, the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1308 will fit your 2006 Dodge Ram Mega Cab with air shocks. The B&W gooseneck hitch has a simple installation with included mounting hardware, no welding is required. The hitch has a gross towing weight up to 30,000 pounds and was manufactured in The USA. To make it easier when hooking your truck up to your gooseneck trailer I recommend the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring...
view full answer... - B and W Gooseneck Hitch that Fits 2011 Ram 3500 Mega Cab Diesel Short BedAt one point the B and W Turnoverball gooseneck part # BWGNRK1308 didn't fit the diesel engine trucks but it's been updated so now it fits both engine styles. I attached an install video for this kit for you to check out as well.
view full answer... - Recommended Fifth Wheel and Gooseneck Hitch for a 2011 Ram 3500 Mega CabThe best fifth wheel and gooseneck setup we have for a 2011 Ram 3500 Mega Cab is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1308 (Gas or Diesel) which can be paired with the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter part # BWRVK3500 or part # BWRVK3400. This setup is not only the best we offer but also the best in the business. The square hole design on the gooseneck helps to reduce rattle as well as there being less of a chance for the ball to...
view full answer... - Comparing the B&W Turnoverball Gooseneck Hitch's BWGNRK1308 and BWGNRK1308-5WThere is no difference between the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1308 and part # BWGNRK1308-5W, they are the exact same parts and will work great on a 2007 Dodge Ram. The "5W" is simply for internal purposes.
view full answer... - Gooseneck Hitch Recommendation for 2006 Dodge Ram Mega CabFor your 2006 Dodge Ram mega cab the B and W Turnoverball goooseneck hitch part # BWGNRK1308 is a fit and a really great option that I would recommend highly. This fits the 1500, 2500, and 3500 models as well. The B and W hitches are widely considered to be the highest quality and easiest to use plus they are made in the USA.
view full answer... - 2009 Dodge Ram 2500 Gooseneck Hitch Recommendation For Use With Blue Ox 5th Wheel HitchIt sounds like you have the Blue Ox 5th wheel hitch that installs onto a gooseneck hitch ball and I believe by "Quad Cab" on your 2009 Dodge Ram 2500 you mean the "Mega Cab". I really like the B&W Turnoverball Gooseneck Hitch because it's a solid choice rated for 30K and you can easily store the hitch ball upside down in the receiver for a completely clear bed. If you have the Mega Cab you need part # BWGNRK1308 but if you have anything else you need the part # BWGNRK1313. The only difference...
view full answer... - 2006 Dodge Ram 2500 Correct Gooseneck FitThe mounting bolt holes for the top plate of the (discontinued) Remov-A-Ball Gooseneck Trailer Hitch with Custom Installation Kit 6300-4435 measures 12-3/8" x 10" (see attached photo). This doesn't quite line up with the spacing on your Curt Center Section # C-52 but we do have some other gooseneck options for your 2006 Dodge Ram 2500. I recommend going with the B&W Gooseneck Hitch as it allows you to store the ball upside down in the receiver plus you won't have that plate sitting above...
view full answer...
- Will B&W Turnoverball Gooseneck Hitch From 2007 Dodge Ram 2500 Fit 1997 Dodge Ram 1500A B&W Turnoverball gooseneck hitch from a 2007 Dodge Ram 2500 will not fit your 1997 Dodge Ram 1500. The B&W Turnoverball gooseneck that fits an '07 Ram 2500 is part # BWGNRK1308 for a Mega Cab or part # BWGNRK1313 for all other models of the 2500. The B&W Turnoverball gooseneck that fits your '97 Dodge Ram 1500 is part # BWGNRK1394, which is going to be a different fit. I strongly recommend this hitch for your truck as it is widely regarded as the best gooseneck in the industry due...
view full answer... - Recommended Gooseneck Hitch for a 2012 Dodge Ram 2500 w/ a Mega CabIt does not but I have one that does. For your 2012 Dodge Ram 2500 with a Mega Cab you will want the B&W Turnoverball System item # BWGNRK1308. This gooseneck hitch has been confirmed to fit the Mega Cab models and works with both gas and diesel engines. I have linked an installation video below to help you get it set up.
view full answer... - Which B&W Turnoverball Hitch Do I Need For 2012 Ram 2500 Mega Cab Diesel I was able to verify with B&W that the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part # BWGNRK1308 does fit the 2012 Ram 2500 diesel mega cab model. So the 1308 is what you need. I have attached an installation video for your reference. The 1313 hitch you referenced does not fit the mega cab.
view full answer... - Correct B&W Turnoverball Gooseneck for a 2008 Dodge Ram 2500 Quad Cab Long BedThe correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2008 Dodge Ram 2500 Quad Cab Long Bed is part # BWGNRK1313, not part # BWGNRK1308 which is for Mega Cab Short Bed.
view full answer... - Will B&W Gooseneck Hitch Fit 2011 Ram 2500 Power WagonYes, the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1308 will fit on your 2011 Ram 2500 Power Wagon with the short bed, but you will need to do a little bit of modification for it to fit. On the driver's side plate there is a little ear that you'll need to cut off and you may or may not have to drill a new hole in the side of that plate for it to match up to your frame. On the passenger's side you may or may not have to drill a new hole into the frame of your pickup for...
view full answer... - Which B&W Turnoverball Gooseneck Hitch Fits a 2012 Ram 2500 With Gasoline Engine?I have a complete replacement option for you, but unfortunately the B&W Turnoverball Gooseneck Hitch # BWGNRK1313 off of your friends 2011 Ram 3500 Diesel uses a different install kit and a different center section than the correct hitch for your truck, so there is not a way to install it on your truck. For your 2012 Ram 2500 with the Gasoline engine you will need to go with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1308 instead....
view full answer... - B and W Gooseneck Hitch Recommendation for a 2006 Dodge Ram Mega Cab Short BedYou should be fine but you would want to check the way the exhaust installs on your truck relative to the truck frame. If the exhaust portion that curves up to go over the axle of your truck does not come up higher than the frame members of your truck the Gooseneck Hitch part # BWGNRK1308 should fit and work just fine on your 2006 Dodge Ram 2500 Mega Cab with 6 foot bed.
view full answer... - Which B and W Gooseneck Hitch Fits 2008 Dodge Ram 3500 Mega Cab Short BedSince your 2008 Dodge Ram short bed is a Mega Cab truck you'd actually need the B and W Gooseneck Hitch part # BWGNRK1308 as the part number you mentioned does not fit the mega cab models.
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Test Fit:
Joe V
Video by:
Andrew K
Video by:
Joshua S
Written by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Kristina F
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
Jonathan Y
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John A.
4/4/2019
Update, the truck listed about was the Power Wagon. Now, after 1yr the hitch has worked great with zero issues.